Skip to Content

Watlow® High-Performance Fluid Heating

FLUENT® In-Line Heater

Compact, fast-response in-line heating for liquids and gases requiring efficient heat transfer and precise temperature control.

REQUEST PRODUCT ASSISTANCE

On-Demand Heating in a Compact Package


The Watlow® FLUENT® in-line heater is a compact, lightweight, high-performance solution for heating flowing liquids and gases.

FLUENT can replace traditional immersion heaters or heaters wrapped around tubing while reducing the number of individual components required within a thermal system.

Watlow's layered heater technology uses the heater surface to efficiently transfer heat into the flowing process medium. High watt density and low heater mass provide rapid response and support on-demand process heating.

Internal temperature sensing can also provide information for heater protection and advanced temperature-control strategies.

Features & Benefits

Fast Thermal Response

High watt density and low thermal mass provide rapid heat-up for responsive, on-demand fluid and gas heating.

Compact Construction

Small, lightweight construction can reduce equipment size and replace multiple components within the thermal system.

Efficient Heat Transfer

Layered heater technology uses the heater surface to promote efficient transfer and improved temperature uniformity.

Custom Heating Profiles

Circuit patterning supports precise power distribution, distributed wattage, and application-specific heating profiles.

Integrated Temperature Sensing

Internal thermocouple options support heater-temperature monitoring, limit protection, and advanced control strategies.

Liquid & Gas Heating

Configurations support in-line heating applications involving both flowing liquids and gases.

FLUENT® Performance


Current FLUENT product literature lists configurations supporting operating temperatures up to 350°C (662°F), pressures up to 150 psi, and voltages up to 240 V. Application limits depend on the process medium, heater configuration, and operating conditions.

Electrical & Thermal

  • Voltage configurations up to 240 V
  • Up to 15 A per heating zone
  • High watt density layered heating
  • Internal temperature sensing
  • Fast-response, low-mass design

Process Construction

  • 444 stainless steel substrate tube
  • 316L stainless steel fittings and baffles
  • Maximum pressure up to 150 psi
  • Air heating up to 350°C (662°F)
  • UL®/cUL® and CE configurations

Watt Solutions Application: FLUENT® + F4T®


A customer asked Watt Solutions® to develop a turnkey assembly using the Watlow FLUENT in-line heater and F4T® with INTUITION® integrated process controller.

The completed system was tested and qualified to provide the required liquid flow while also allowing the pump to be bypassed so the same thermal system could control pressurized gas.

Temperature Control

The F4T controlled the FLUENT heater using the heater's internal thermocouples for cascade control, an inlet thermocouple for process data, and an outlet thermocouple for final process-temperature control.

Flow Control

The system incorporated a process pump capable of controlling flow down to 0.02 L/min. The F4T supplied the open-loop pump command, with flow adjustment available directly from the touchscreen.

Liquid & Gas Operation

Couplings were incorporated into the system so the pump could be bypassed, allowing the thermal assembly to process either liquid or pressurized gas.

Integrated Operator Interface

Process readings, temperature set points, pump adjustments, and system functions were presented through the F4T touchscreen operator interface.

Typical Applications


Medical & Life Sciences

Fast, controlled fluid heating for applications including hemodialysis and other temperature-critical equipment.


Semiconductor & Gas Delivery

Responsive process heating for purge gases, carrier gases, and temperature-controlled semiconductor equipment.


On-Demand Fluid Heating

Compact heating for food equipment, ink preheating, liquid processing, and other applications requiring fast thermal response.

Technical Resources

Review current Watlow FLUENT product information before selecting or configuring your heater.

FLUENT® Product Literature

Review heater construction, available configurations, wattage, voltage, materials, fittings, and performance data.

VIEW PRODUCT PDF

F4T® Integrated Process Controller

Learn more about the Watlow F4T touchscreen controller used to coordinate temperature, flow, machine I/O, and application functions.

VIEW F4T CONTROLLER

Need Help With an In-Line Heating Application?

Watt Solutions® can help evaluate the process medium, flow rate, inlet and outlet temperatures, pressure, wattage, voltage, heater size, sensors, flow control, and temperature-control strategy.